F3
Front minus left
F3-2905210
Automobile shock absorber is an important part of automobile suspension system. Its function is to inhibit the absorption of vibration and deformation by spring rebound shock, and absorb the impact of road surface. It directly affects the ride comfort and maneuverability of the vehicle, which will affect our driving safety.
مطلوب الان
Front minus right
F3-2905110
Front dust cover
F3-2905203
F3, F3R, G3,G3R,L3
Front cover
F3-2905300
F3, F3R, G3,G3R,L3,third generationF3
Open glue
F3-2906103
The balance rod rubber sleeve has the function of fixing the balance rod and buffering the stress of the balance rod
Stabilizer bar
F3-2906110
F3, G3, F3DM, L3, F3R, G3R, brand new F3, third generation F3, e2, e3
Front horn left
F3-3001101
The horns of the car are called "steering knuckles" or "steering knuckle arms", which are the shaft heads that undertake the steering function at both ends of the I-beam in front of the car.
Head
F3-3103110
The function of the shaft head part of the automobile bearing is usually to install the bearing and play the role of supporting the operation of the equipment on the shaft.
Lower arm ball head
F3-2904140
The lower arm ball joint is an important part connecting the lower arm and the body
After subtraction
F3-2915100
F3,F3R,G3,L3,G3R
Aluminum alloy small cover
F3-3102010-C1
Aluminum alloy small cover plays the role of beauty and decoration
Tire pressure sensor F3
SC-3609200
The functions of tire pressure monitoring are: 1. When the tire is rolled, it will alarm in time if there is a rapid or slow air leakage; 2. When the tire is loose, causing unbalanced friction, and causing the tire temperature to reach 70 degrees Celsius, it will alarm to prevent tire blowout.
Full car lock cylinder
F3-3704010-C1
A set of ignition lock cylinders, door lock cylinders and back door lock cylinders for the whole car.
Steering machine assembly
F3-3401090
Car steering gear, also known as steering gear and steering gear, is the most important component in the steering system of an automobile. Its function is to increase the force transmitted from the steering wheel to the steering transmission mechanism and to change the direction of force transmission.
Pull rod
F3-3401040
The straight pull rod is a kind of rod connected to the steering arm and the left arm of the steering knuckle.
Ball head left
F3-3401010
Its function is to combine with the rack and swing up and down. 2. The ball head is commonly known as the steering machine. It is the most important part of the car for the steering function, and it is also an important guarantee for the safety of the car
Ball head right
Steering booster pump
F3-3407010-C1
It is a set of gear mechanism that completes the movement from rotary motion to linear motion (or approximate linear motion), and is also a deceleration transmission device in the steering system.
Front plate
F3-3501102-C2
The brake disc, in simple terms, is a round disc that rotates when the car is moving. The brake caliper clamps the brake disc to generate braking force. When the brake is applied, it clamps the brake disc to slow down or stop.
Front sub-pump left
F3-3501150
The function of the car caliper: It has the functions of decelerating, stopping or maintaining the stopped state of the moving wheels. Generally, it is only used in the disc brake system. It is the part that protrudes from the outside of the brake pad and can enhance the braking performance.
ماركة السيارة
قطعة منفصلة
وكيل العلامة التجارية
إقتبس
روابط سريعة
فئة المنتج
اتصل بنا
هاتف: +86 531 8898 5721
بريد إلكتروني: admin@cnjkautoparts.com
يضيف.: رقم 299 ، طريق Jisheng ، منطقة التنمية الاقتصادية والتكنولوجية Xuancheng ، مقاطعة Anhui ، الصين
اشترك في النشرة الإخبارية
مرحبا بكم في الاشتراك في رسالة البريد الإلكتروني لدينا!