F3
Dynamo
471Q-3701950
When the engine is running normally, power is supplied to all electrical equipment except the starter, and the battery is charged at the same time. The generator is the main power source of the car.
مطلوب الان
Starter
473QA-3708020
The function of the car starter is that the starter can convert the electric energy of the battery into mechanical energy, and drive the engine flywheel to rotate to realize the starting of the engine.
Oxygen Sensor F3
476Q-1D-1207804
Oxygen sensor is a key feedback sensor in the EFI engine control system. It is a key part to control automobile exhaust emissions, reduce automobile pollution to the environment, and improve the fuel combustion quality of automobile engines. Oxygen sensors are installed on the engine exhaust pipe.
Water tank
F3-1301100
F3,G3,L3,F3R,G3R,brand newF3
Upper water pipe F3
F3D-1303011
The upper water pipe, connected to the cylinder head water outlet or the thermostat cover, transmits the coolant, and is used in the automobile cooling system
Downpipe F3
F3D-1303012
Downpipe, connected to the water inlet of the water pump, conveying coolant
Water tank electronic fan
F3-1308010
It is generally used for engine heat dissipation and antifreeze heat dissipation to ensure that the engine will not fail due to high temperature.
Kettle F3
F3-1311100-C1
An integral part of the engine cooling system that acts as a balancing tank pressure
Platen
F3-1601100
F3, F3R, G3, L3, G3R, Su Rui, the new F3, Yuan, the third generation F3, Qin Pro fuel, the new Qin fuel
Clutch plate
F3-1601200
F3, F3R, G3
Release bearing
BS15-1602800
The automobile release bearing is used to add and subtract the clutch, and the release bearing rests on the clutch pressure plate, so that the separation of the clutch pressure plate plays the role of adding and subtracting gears.
Split fork
5T14-1602811
The lever, the release fork presses the release bearing, so that the release bearing presses the release lever again, so that the pressure plate and the grinding plate are separated.
Clutch master cylinder
F3-1608100
The clutch master cylinder is the part connected to the clutch pedal and connected to the clutch booster through the oil pipe. Its function is to collect the pedal stroke information to separate the clutch through the action of the booster.
Clutch slave cylinder
BS15-1602801
F3,G3,F3R
Reverse switch
BS15-3729800
The car reversing switch is to turn on the reversing lights and the reversing radar
Two-axis
BS15-1701004
power output shaft
Synchronizer 1/2
BS15-1701906A
One axis
BS15-1701003
The input shaft of the gearbox is to transmit the power generated by the engine to the gearbox, so that the gearbox can increase and decrease gears, and the output shaft is to realize the acceleration and deceleration and transmit the power to the driving wheel.
Odometer sensor F3
5T14-3802080
The more commonly used electronic instrument is generally on the output shaft of the gearbox. Or a speed sensor is installed on the wheel, and the read speed is converted into vehicle speed and history through the calculation formula embedded in the control module.
Gear line
F3D-1703200
The main functions of the car gear line are: returning to neutral and adding and subtracting gears
ماركة السيارة
قطعة منفصلة
وكيل العلامة التجارية
إقتبس
روابط سريعة
فئة المنتج
اتصل بنا
هاتف: +86 531 8898 5721
بريد إلكتروني: admin@cnjkautoparts.com
يضيف.: رقم 299 ، طريق Jisheng ، منطقة التنمية الاقتصادية والتكنولوجية Xuancheng ، مقاطعة Anhui ، الصين
اشترك في النشرة الإخبارية
مرحبا بكم في الاشتراك في رسالة البريد الإلكتروني لدينا!